We do not always have a good idea what goes on during the construction process of our homes. Because of this, lots of home purchasers ask lots of questions like: How long will the house take to build? What does the construction process involve? When can they visit the site?
When you are asking the same questions, this short article can help you understand the basic home construction process; even though this short article only provides a brief overview, it’s going to still help you get a general idea of how the construction process works.
Stage 1: Pre-Construction
Before the home construction starts, the floor plans should first be developed, finalized, and then submitted to the municipal office for review to obtain a building permit. The building permit is required for numerous construction work such as electrical, sewer connection, septic system, plumbing and home building. Moreover, the home builders will conduct site tests to examine the soil, the capacity of the ground, water table, and environmental checks.
Stage 2: Foundation
After obtaining the required building permit and doing all the primary tests, the land of your house is going to be prepared. The topsoil is going to be taken out and piled somewhere else to b used afterwards. Excavation is also carried out, along with the footings which are concrete slabs to support the wall foundation, are created and poured. The wall foundations can also be erected. This process might use concrete temporary wooden forms or preserved wood, or permanent insulated blocks. Weeping tiles are also set up so that the ground moisture is going to be drained away from the house. During this stage, the home builder might ask you to choose flooring, cabinets, tiles and much more.
Stage 3: Framing
This stage involves erecting a framing skeleton. The exterior sheeting can also be used or other framing technique can also be applied. Frame are also constructed on the floor, one wall at a time and then lifted in place. The windows and doors will also be installed in this phase.
Within this process, the basement floor can also be constructed and installed. Electrical and plumbing are roughed in, along with the heating, cooling, and ventilation. In this phase, the municipality will perform a inspection to ensure that the house is built in line with the building codes. Electrical and plumbing inspections is likewise conducted.
Stage 4: Interior and Exterior work
Throughout the next phase, interior and exterior work is going to be done simultaneously; therefore, correct scheduling should be observed. The insulation of the exterior walls is done, heating and cooling systems are installed, and vapor barrier is going to be used. On this process, the walls and ceilings may also be painted, the flooring is laid, and the cabinets for the kitchen and bathroom are installed. These are just some of the work involved in this phase. Furthermore, during this phase, the home builder will remain in touch with you to keep you updated on the construction progress.
Recommended by us:
Affordable New Home Construction
